Gilson MORTAR-PLASTER 1200MP - Manual (Page 4)

3
1 – SAFETY PRECAUTIONS
THE FOLLOWING PRECAUTIONS ARE SUGGESTED TO HELP PREVENT
ACCIDENTS. A CAREFUL OPERATOR IS THE BEST OPERATOR. MOST
ACCIDENTS CAN BE AVOIDED BY OBSERVING CERTAIN PRECAUTIONS.
READ AND PRACTICE THE FOLLOWING PRECAUTIONS BEFORE
OPERATING THIS EQUIPMENT TO HELP PREVENT ACCIDENTS.
EQUIPMENT SHOULD BE OPERATED ONLY BY THOSE WHO ARE
RESPONSIBLE AND HAVE BEEN PROPERLY INSTRUCTED.
Read all operating and maintenance instruction before operating or servicing
the mixer. Test run the empty unit prior to actual use.
A mixer is only as safe as its operator. Give complete and undivided attention
to the operations of the mixer.
Know how to stop the mixer and engine/motor instantly in emergency
situations.
Always keep all guard and safety devices and labels attached and in place
before operating mixer. Close engine housing during mixer operation.
Keep inexperienced and unauthorized people away from the mixer at all times.
Never leave the mixer unattended when it is running
Shut off engine or disconnect electric power before making repairs or
adjustments. NEVER REACH INTO DRUM OR PLACE TOOLS INTO
THE DRUM WHILE THE MIXER IS RUNNING.
Do not overfill- -do not attempt to exceed the mixer’s rated capacity.
Do not refuel the engine when it is hot or running.
Do not smoke while refueling the engine.
Block mixer wheels when in operation.
Keep the mixer well maintained and in good operating condition. Check
periodically for loose or missing hardware.
Avoid loose clothing that could get caught in moving parts or on control levers.
KEEP HANDS AND FEET AWAY FROM MOVING PARTS.