Garmin 910XT User Manual
Page 13
Training with Your Forerunner
11
Default Settings
Sport Mode Default Distance
Run
1 mile or 1 kilometer
Bike
5 miles or 5 kilometers
Open water
swim
0.25 mile or 0.5 kilometer
Other
1 mile or 1 kilometer
Marking Laps by Distance
You can use Auto Lap to automatically
mark the lap at a specific distance. This
feature is helpful for comparing your
performance over different parts of a run.
1
Select MODE > Settings > run
Settings > Auto Lap.
2
Select Auto Lap Trigger > By
Distance.
3
Select Lap At, and enter a distance.
Marking Laps by Position
You can use Auto Lap to automatically
mark the lap at a specific position. This
feature is helpful for comparing your
performance over different parts of a
run (for example, a long hill or training
sprints).
1
Select MODE > Settings > run
Settings > Auto Lap.
2
Select Auto Lap Trigger > By
Position > Lap At.
• Select Lap Press Only to trigger
the lap counter each time you
select LAP and each time you
pass any of those positions again.
• Select Start and Lap to trigger the
lap counter at the GPS location
where you select STArT and at
any location during the run where
you select LAP.
• Select Mark and Lap to trigger
the lap counter at a specific GPS
location marked before the run
(use Mark Position) and at any
location during the run where you
select LAP.
NOTE: When doing a course
), use By Position to mark
laps at all of the lap positions marked
in the course.