Gateway FPD1775W - Manual (Page 17)

Adjusting monitor settings www.gateway.com
13
Important
When adjusting the monitor settings,
always press the Auto button before
entering the OSD. This will automatically
adjust the monitor image to the ideal
settings for the current screen resolution.
4 After you see the Windows desktop, press the Auto button on the right
side of the monitor to automatically adjust your monitor image to the ideal
settings.
5 Use the on-screen display (OSD) to adjust other monitor settings. For more
information, see “Adjusting monitor settings” on page 13.
Adjusting monitor settings
Use the monitor controls (located on the monitor itself ) and computer controls
(accessible through Windows) to adjust the monitor image. For more
information about computer controls, see “Adjusting Windows display settings”
on page 16.
Monitor buttons
Important
The appearance of your monitor may
vary from that shown.
This monitor features an on-screen display (OSD) that lets you adjust contrast,
brightness, and other settings for the monitor. The monitor saves changes you
make to the settings, even if you turn off the monitor.
■ Input
OSD active: Press to move to the previous menu.
OSD inactive: Press to select the video source.
■ Auto
OSD active: Press to open a menu or setting.
OSD inactive: Press to automatically optimize the monitor’s image
position, clock, and phase.
■ / (brightness)
OSD active: Press to move up through menu selections and adjust OSD
options.
OSD inactive: Press to adjust the brightness.
Menu button
Auto button
Contrast button
Brightness button
Input button
8511808.book Page 13 Friday, November 17, 2006 9:56 AM