GE 2-9772 - Manual (Page 18)

18
C
HANGING A
S
TORED
N
UMBER
Use the same procedure to change a stored
number as you do to store a number—in a
sense, you are just reassigning the memory
location.
D
IALING A
S
TORED
N
UMBER
1. Make sure the phone is ON by pressing the
PHONE button.
2. Press MEMORY
3. Press the number (0-9) for the desired
memory location OR use the arrow buttons
to scroll through the numbers stored in
memory and press CALL BACK when you
reach the desired number.
C
HAIN
D
IALING FROM
M
EMORY
Use this feature to make calls that require a sequence of numbers, such as
a calling card number used for a frequently called long distance number.
The following example shows how you can store each part of the long
dialing sequence and use chain dialing to make a call through a long
distance service:
The Number For Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
PHONE
MEMORY
CALL BACK
1. Make sure the phone is ON.
2. Press MEMORY and then press 7.
3. When you hear the access tone, press
MEMORY and then press 8.
4. At the next access tone, press MEMORY
and then 9.
TIP: Wait for the access
tones before pressing
the next memory
button or your call
might not go through.