Graco MAGNUM 261800 - Manual (Page 30)

Storage
30 312079A
Stowing Sprayer
1. Use inlet screen handle to
install inlet screen into
hopper.
2. Coil hose and leave it connected to sprayer.
3. If not already secured to
hopper, clip prime tube
to side of hopper.
4. Replace cover on
hopper and return
handle to normal
position.
NOTE: Handle does
not lock cover down.
5. Store sprayer indoors.
Be sure to turn AllControl to OFF and pause 2
- 3 seconds before turning to STORAGE to
relieve pressure in the system.
CAUTION
• Before storing sprayer make sure all water is
drained out of sprayer and hoses.
• Do not allow water to freeze in sprayer or hose.
• Do not store sprayer under pressure.
ti9306a