GE Monogram GE Fanuc Automation GFK-1115 - Manual (Page 51)

GFK-1115 Chapter 3 Quick Start 3 - 27
3
From the Select field type window that is displayed, select the Output Date/Time option:
The output format for the date and time is selected from the following window that is displayed:
Do not make any changes in this window and press the F4 Accept function key. The Date/Time
field will be displayed in the start-up picture:
Move the cursor to position (1,3), type the text Bus Scan: , and press
↵ ↵
. Next, move the cursor
to position (16,3), type the text ms , and again press
↵ ↵
.
Using the same process detailed above for creating the Output Date/Time field, position the cursor
at (11,3), and create an Output Word (unsigned) field with the following definition: