GIGABYTE GA-7VA1004 - Manual (Page 77)

Technical Reference - 71 -
English
Use the back audio panel to connect the audio output
w ithout any additional module.
STEP 1 :
Connect the front channels to “Line Out”,the rear chan-
nels to “Line In”, and the Center/Subw oofer channels
to “MIC In ”.
Basic 6 Channel Analog Audio Output Mode
STEP 2 :
After installation of the audio driv er, you ‘ll find an
icon on the taskbar’s status area. Click the audio icon
“Sound Effect” from the w indow s tray at the bottom of
the screen.
STEP 3 :
Select “Speaker Configuration”, and choose the
“6 channels for 5.1 speakers out put”.
Disable “Only SURROUND-KIT” and pess “OK”
Line Out
Line In
MIC In