Gateway GM5684E - Manual (Page 52)

CHAPTER 4: Upgrading Your Computer
46
5 Unplug the cable from the back of the card reader, then
slide the card reader toward the front of your computer.
6 Slide the new card reader into place, then secure it with
the two screws you removed previously.
7 Plug the cable into the card reader.
8 Place the top bezel on top of the computer, then slide
bezel toward the back of the computer until it clicks into
place.
9 Reinstall the bezel by following the instructions in
“Replacing the front bezel” on page 37 .
10 Reinstall the computer case’s side panel by following the
instructions in
“Replacing the side panel” on page 38 .
8513016.book Page 46 Wednesday, April 16, 2008 12:01 PM