Gardena Art. 875 - Manual (Page 4)

12
GB
3. Assembly
3.1. General Assembly Instructions for all Pressure Sprayers
(Art. No. 867 / 869 / 875 / 879 / 880)
1. Unscrew the union nut 1 on the hand valve 2 .
2. Push the spray tube 3 all the way into the hand valve 2 .
3. Tighten the union nut 1 on the hand valve 2 by hand
(do not use pliers).
The sprayer tube of art. 880 is telescopic (min. / max. sprayer
tube length 60 / 100 mm).
1. Push the long union nut 4 over the spray hose 5 .
2. Push the spray hose 5 with connection nipple 6 into the
hand valve 2 .
3. Tighten the long union nut 4 on the hand valve 2 by hand
(do not use pliers).
3.2. Assembly Instructions for Pressure Sprayer Art. No. 869
1. Shut the filter 7 and press firmly
into the suction pipe 8 .
2. Guide the suction pipe 8 through
the eyelet at the pump tube 9
and press firmly into the opening in
the container cap.
1. Push the short union nut 0 over the spray hose 5 .
2. Push on the spray hose 5 so that it covers at least the
beginning of the thread A .
3. Screw the short union nut 0 onto the container cap B
and tighten by hand (do not use pliers).
1. Unscrew the screw C using a screwdriver and remove the
spray tube holder D .
2. Put the shoulder strap E with the elongated hole over the
plastic tube F .
3. Reattach the spray tube holder D and screw in the screw C
using a screwdriver.
Mounting the spray tube
in the hand valve :
Attaching the spray hose
to the hand valve :
Installing the filter
and suction pipe :
Attaching the spray hose
to the container cap :
Attaching the shoulder strap :
2 6 4 5
8
7
5
0
A
B
1. 2.
F
E
C
D
8
9
2
1 3
Art. 880