GE 25982 - Manual (Page 28)

8
Switching Between Speakerphone and Handset
You can switch between speakerphone and handset after dialing a number, or any
time during a conversation.
Speaker to Cordless/Corded Handset — Press TALK/CALL BACK or SPEAKER on
handset, and then press speaker/call back on the base. Or lift the corded handset
when using speaker phone. Speak into the cordless/corded handset.
Corded/Cordless Handset to Speaker — Press speaker/call back, then hang up the
handset. Speak into the Speakerphone.
Cordless Handset Speakerphone Operation
Switching Between the Speakerphone and Handset Earpiece
• If you are using the cordless handset earpiece and want to switch to the handset
speakerphone, press the SPEAKER button; you can then press SPEAKER button
again to end conversation.
• If you are using the cordless handset speakerphone and want to switch to the
cordless handset earpiece, press the TALK/CALL BACK button, you can then press
the TALK/CALL BACK button again to end conversation.
Conference the External Caller with Cordless
Handset and Base
The handset or the base can enter conference directly by pressing TALK/CALL BACK
or SPEAKER button on the handset or speaker/call back button on the base while the
other party (handset or base) is on the external line.
Memory
The cordless handset and base each have their own separate memory storage areas.
Store ten 15-character names and 4-digit telephone numbers in the handset and
base memories.
Storing a Name and Number in Memory
1. Press the memory/conf button on base or mem/conference button on handset.
. Press the desired memory location button (0 through 9 number keys) or use the
caller id (9 or :) button on the base or the CALLER ID-VOLUME (6 or 5) button
on the handset to scroll to the desired location. If the memory location is occupied,
the stored name and number displays. If the memory location is unoccupied,
EMPTY shows in the display.