Garmin 5008 - Manual (Page 41)

GPSMAP ® 4000/5000 Series Owner’s Manual 3
Using the Garmin Marine Network
Marine
Network
Using the Garmin Marine Network
The Garmin Marine Network allows you to share data from Garmin peripheral devices between
Garmin chartplotters quickly and easily. You can connect your GPSMAP 4000 series and GPSMAP
5000 series chartplotters, and previous Garmin Marine Network compatible chartplotter models
(GPSMAP 3005/3006/3010), to your network to share data. With the Garmin Marine Network, you
can:
Share GPS data from a GPS 17 antenna that is wired to one chartplotter, with every chartplotter
connected to the Garmin Marine Network.
Share NMEA 0183 data from devices that are wired to one chartplotter, with every chartplotter
connected to the Garmin Marine Network.
NOtE: Both the GPS 17 and any NMEA 0183 devices must be connected to the same chartplotter to
achieve the best results when sharing data over the Garmin Marine Network.
NOtE: If you are using a GSD 21 wired to a GPSMAP 3006/3010 chartplotter, data is shared with
any GPSMAP 4000 series and GPSMAP 5000 series chartplotters connected to your Garmin Marine
network. All GSD 21 settings must be configured on the GPSMAP 3006/3010. You cannot wire a GSD
21 to a GPSMAP 4000 series or GPSMAP 5000 series chartplotter.
Share data from Garmin Marine Network devices connected to any chartplotter in the Marine
Network or to a GMS 10 Marine Network Port Expander, with every other chartplotter connected
to the Marine Network. These devices include:
GSD 22 digital sounder—provides sonar data when connected to the Garmin Marine
Network and an appropriate transducer. Sonar data is shared by all chartplotters on the
network.
GMR 21/41 Radome; GMR 18 Radome; and GMR 404/406 Open Array Radar—
provide radar data when connected to the Garmin Marine Network. Radar data is shared by
all chartplotters on the network.
Share BlueChart g2 Vision cartography data from an SD card inserted in one GPSMAP 4000
or GPSMAP 5000 series chartplotter with every GPSMAP 4000 and GPSMAP 5000 series
chartplotter connected to the Marine Network.
NOtE: BlueChart g2 Vision cartography is only compatible with GPSMAP 4000 and GPSMAP 5000
series chartplotters. Previous Garmin Marine Network-compatible chartplotter models (such as the
GPSMAP 3010) can be connected to your network, but they cannot share BlueChart g2 Vision data.
Transfer waypoint, route, and track information from one chartplotter connected to the Garmin
Marine Network to every other chartplotter connected to the network. The data can be cloned
from one chartplotter to every other connected chartplotter, or the data can be merged and shared
with every connected GPSMAP 4000 and GPSMAP 5000 series chartplotter.
•
•
•
◦
◦
•
•