Before you call for service – GE DPSB513 User Manual

Page 18

Advertising
background image

18

Operating Instructions

Safety Instructions

Consumer Support

Troubleshooting T

ips

Before you call for service…

OPERATION

Possible Causes

What To Do

The DRY dryness level

Load consists of a mixture

• When combining heavy and light fabrics in a load,

was chosen but load is

of heavy and light fabrics

choose MORE DRY.

still damp

Exhaust system is blocked

• Inspect and clean exhaust system.

Cannot make a

The DRYNESS LEVEL, HEAT

• This is normal.

selection and the

SETTING or OPTION that

dryer beeps twice

you are trying to select is
incompatible with the chosen
dry cycle

Dryer is running but

The EXTEND TUMBLE

• This is normal. During extended tumbling, the time

00 is displayed in

option was chosen

remaining is not displayed. The extended tumbling

Est. Time Remaining

option lasts approximately 20 minutes.

LAUNDRY PRACTICES

Possible Causes

What To Do

Clothes are wrinkled

Overdrying

• Select a shorter drying time.

• Remove items while they still hold a slight amount of

moisture. Select a LESS DRY or DAMP setting.

Letting items sit in dryer after

•Remove items when cycle ends and fold or hang

cycle ends

immediately, or use the EXTEND TUMBLE option.

Clothes shrink

Some fabrics will naturally shrink

To avoid shrinkage, follow garment care labels exactly.

when washed. Others can be
safely washed, but will shrink

• Some items may be pressed back into shape after drying.

in the dryer

• If you are concerned about shrinkage in a particular

item, do not machine wash or tumble dry it.

Greasy spots on clothes

Improper use of fabric softener

• Follow directions on fabric softener package.

Drying dirty items with clean ones

Use your dryer to dry only clean items. Dirty items can
stain clean items and the dryer.

Clothes were not completely clean

Sometimes stains which cannot be seen when the
clothes are wet appear after drying. Use proper
washing procedures before drying.

Lint on clothes

Lint filter is full

• Clean lint screen before each load.

Improper sorting

• Sort lint producers (like chenille) from lint collectors

(like corduroy).

Static electricity can attract lint

• See suggestions in this section under STATIC.

Overloading

• Separate large loads into smaller ones.

Paper, tissue, etc., left in pockets

Empty all pockets before laundering clothes.

Advertising
This manual is related to the following products: