Grizzly H8209 - Manual (Page 5)

Model H8209 14-Piece Air Tool Kit -4 -
OPERATIONS
The impact wrench requires 90 PSI to
operate correctly. To improve air tool
lifespan, use a filter/lubricator/regulator
setup shown in
Figure 2.
Quick
Connector
Quick
Coupler
Air Hose
Quick
Coupler
Quick
Connector Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 2. Installed filter lubricator
regulator.
ACCIDENTAL
START HAZARD!
Disconnect before
service or tool
changes.
AIR PRESSURE
HAZARD!
Never exceed 120
PSI.
LUNG/EAR
INJURY HAZARD!
Wear protective
equipment when
using this tool.
Read the manual before operation.
Become familiar with this tool, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety
or operational information is not
understood or followed.
Otherwise, lubricate the impact wrench
daily with a couple drops of pneumatic tool
oil directly into the tool's air inlet fitting, as
shown in
Figure 3, before and after each
use.
Figure 3. Manual oiling.
Drive Size................................................ 1 ⁄
2
"
No Load Speed..........................7000 RPM
Max. Torque...................230 ft/lb (310N.m)
Air Inlet.....................................................
1 ⁄
4
"
Air Hose ID............................................... 3 ⁄
8
"
Operating Air Pressure.....................90 PSI
Average Air Consumption................4 CFM
Weight................................................5.4 lbs
Impact Wrench
Specifications
Air Supply