GIGABYTE GA-7vkml - Manual (Page 13)

English
Introduction - 9 -
To set up your computer, you must complete the following setups:
Step 1- Set system Switch (CLK_SW)...for PCB Ver. 1.1
Step 1- Set system Jumper(CLK_JP)...for PCB Ver. 3.2
Step 2- Install the Central Processing Unit (CPU)
Step 3- Install memory modules
Step 4- Install expansion cards
Step 5- Connect ribbon cables, cabinet wires, and power supply
Step 6- Setup BIOS software
Step 7- Install supporting software tools
Chapter 2 Hardware Installation Process
PCB Ver. 1.1
Step 5
Step 1
Step 3
Step 5
Step 4
Step 2
PCB Ver. 3.2
Step 5
Step 1
Step 3
Step 5
Step 4
Step 2