Grizzly 14.4v 3/8" Cordless Drill G8594 - Manual (Page 10)

G8594 14.4V Cordless Set -10 -
Detail Sander
Transfer the battery pack to the sander.
The battery snaps into the base the same
as the drill.
Install the desired sandpaper grit onto the
triangular sanding pad. Please consult the
Grizzly catalog or website for ordering
information for sandpaper. The sandpaper
attaches by means of a hook and loop
material. Be certain the replacement sand-
paper purchased is of this type.
The oscillating motion of the triangular
sanding pad provides fast cutting action for
detail and intricate sanding. The detail
sander is excellent for hard-to-reach
places like the corners of a picture frame.
Both wood and metal materials can be
sanded with this device as long as the
appropriate types of sandpaper are
installed. Always be sure to check the
sandpaper for loading and sharpness of
grit. Change the sandpaper when the
paper loses its surface, or when the edges
become torn or loose.
DETAIL SANDER OPERATION
Operating this equipment has the
potential to propel debris into the air
which can cause eye injury. Always
wear safety glasses or goggles when
operating equipment. Be certain the
safety glasses you wear meet the
appropriate standards of the
American National Standards
Institute (ANSI).