Goodmans G-SHOT 5011CC - Manual (Page 21)

21
In the below table, default setting is indication with an asterisk [Þ]
[ Auto Off ]
Þ 1min
/
3min
/
Never Sleep
Functions:
- This item determines the auto-off time when the camera stay idle
[Beep]
Þ 1min
/
3min
Functions:
- This item allows you to toggle the beep sound on or off
[Brightness]
Exposure Compensation Range : -2.0 (darker) to +2.0EV(brighter)
ÞDefault setting : 0
Functions:
- This item allows you to adjust the brightness level of LCD monitor
[ Display Setup]
You can view stored movies and pictures on a LCD Display or Television
Þ LCD
/
TV (PAL)
/
TV (NTSC)
Note: Setting TV System
- TV(PAL) for PAL standard: UK, Europe, China, Australia, Singapore & Hong Kong etc.
- TV(NTSC) for NTSC standard : USA, Canada, Japan, South Korea and Taiwan etc.
[Format]
This item allows you to format the store media that is currently in use.
Functions:
- You can use this function to prepare the SD card to record media, BUT all files stored in
media will be gone after executing this function!
[Date/Time
Setting]
This item is for date & time setting.
l Move between Date, Time and Exit by using Left/Right buttons.
l Adjust date and time by using Up/Down buttons, then select OK to validate each
change.
l Select MENU to leave Time Setting without any change.
Note:
-
If you remove the battery from the camera, you will need to set the date and time again the
next time you reinsert the battery and use the camera.
[Default Setup ]
Use this function to return the camera settings to default values except for date & time
[Version ]
This function shows the camera’s software version (this info is used by service centre)