GE VG4258 - Manual (Page 32)

30
Recording a Program
Recording Audio Only
You can record audio only from another audio source connected to the AUDIO IN (L and R) jacks
on the back of the VCR.
To Record Audio Only
1. Press the INPUT button until the line indicator
(VIDEO) appears on the TV screen.
The VCR will record audio from the audio
equipment connected to the AUDIO IN jacks.
2 . Use SPEED on the remote to select the
recording speed.
The tape speed indicator appears in the VCRÕs
display panel and on the TV screen.
3 . Make sure the Reception:
STEREO/MONO/SAP feature is set to STEREO.
A . Press MENU to display the VCR MAIN
MENU on the TV screen.
B. Press 6 to display the AUDIO menu.
C. Press 1 to select Reception: STEREO.
4 . Start audio source playing and press REC•OTR
on remote or RECORD on the VCR to begin
recording.
REC and
D
appear in the VCRÕs display
panel.
5 . Press STOP when you are finished.
To Playback Audio Only
Connect the AUDIO OUT of the VCR to the
appropriate input on your amplifier or receiver.
Do not use the phono input. Refer to your
amplifier or receiver userÕs guide for information.
Recording Features
Recording Pause
To prevent recording short passages of unwanted material, use PAUSE during
recording to stop and start recording. The VCR automatically switches from
pause to stop after a few minutes.
AUDIO
1 Reception: STEREO
2 Tape Playback: HI-FI
0 Exit
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit