Gefen GEF-3GSDI-FO-141 - Manual (Page 9)

6
CONNECTING THE 3GSDI FIBER OPTIC EXTENDER
How to Connect the 3GSDI Fiber Optic Extender
1. Connect the Sender of the GefenPRO 3GSDI Fiber Optic Extender to the
3G-SDI source equipment via the BNC connector.
2. Remove the locking protective cover from the fi ber connector of the Sender
and connect one end of the fi ber cable to the ST connector of the Sender.
3. Remove the locking protective cover from the fi ber connector of the Receiver
and connect the other end of the fi ber cable to the ST connector of the
Receiver.
4. Connect the BNC output connector to the SDI display device.
5. Connect the included 5 V DC power supplies to both the Sender and
Receiver.
GEF-3GSDI-FO-141 Connection Diagram