Cleaning, Automatic clean function – GE 690503910000700243 User Manual
Page 11
Client:
PIL (Wal*Mart)
Project:
169164
Language: EN
Date:
25.12.2007
Version:
06
Page:
11
(of 14 pages)
11
Barcode: 690 5039 10 000 7 00243
CLEANING
Automatic clean function
The coffee maker is equipped with an automatic clean function. After 60 brewing cycles,
the
clean indicator/button (22) lights up. This indicates coffee maker should be cleaned
by using the automatic clean function and the charcoal filter
(17) should be replaced.
NOTE: The coffee maker can continue to be used, when clean indicator/button (22) is
on.
•
To begin the cleaning cycle, remove the charcoal filter
(17) from the water tank
(10). Fill the tank with a vinegar and water mixture (1/2 vinegar and 1/2 water) or a
descaling product. Press
clean (22) button for three seconds. The clean indicator/
button
(22) flashes and the cleaning process begins.
Cleaning process:
•
24 cycles of 7 seconds brewing and 21 seconds off
•
30 minutes rest
•
Brewing the remaining descaling solution
•
After cleaning process is complete the
clean indicator/button (22) goes off. Fill water
tank
(10) with clean water and run one brewing cycle to rinse the coffee maker.
•
Change the charcoal filter
(17) (ill. k ). Reinsert the charcoal filter to the coffee
maker (ill. l ).
NOTE: You can use the cleaning function before reaching 60 cycles (especially if the water
hardness is above normal). Press and hold
clean indicator/button (22) for 3 seconds.
NOTE: The Cleaning Process takes 60 minutes to complete. You cannot cancel the
cleaning process before it is complete. Unplugging the machine only delays the cleaning
process.