Grizzly Model G1033Z - Manual

INTRODUCTION
The Model G1033Z is the same planer as the
Model G1033 with the upgrade of the chromed
3-roller extension rollers and 5 HP motor.
INVENTORY
1. Planer Unit .................................................. 1
2. Dust Hood .................................................. 1
3. Starter Switch Assembly ............................ 1
4. Table Extension Roller Assembly .............. 2
5. Handwheel ................................................. 1
6. Handwheel Handle ..................................... 1
6. Hardware Bag :
— Hex Bolt M6-1 x 12 ................................. 6
— Flat Washer 6mm ................................... 6
— Hex Bolt M10-1.5 x 25 ............................ 8
— Flat Washer 1/2" ..................................... 8
— Knife Setting Rod .................................... 1
— Knife Setting Gauge ............................... 2
— E-Clip Ring 9mm ..................................... 4
—Hex Nut M12-1.75 .................................. 1
—Flat Washer 12mm ................................. 1
—Direction Label ........................................ 1
— Allen Wrench 3mm ................................. 1
— Allen Wrench 4mm ................................ 1
— Allen Wrench 5mm ................................. 1
— Allen Wrench 6mm ................................. 1
— Open End Wrench 8/10mm .................... 1
— Open End Wrench 12/14mm .................. 1
— Open End Wrench 17/19mm .................. 1
MANUAL INSERT
Model G1033Z
20" 5 HP Planer
Figure 1. Model G1033Z.
RECOMMENDED FOR SETUP
G1738—Rotacator™ Precision Planer Tool
The Rotacator is a dial indicator on a magnetic
base designed for quickly and accurately setting
the critical tolerances needed when adjusting
planers to avoid chattered cuts.
Helps adjust infeed/outfeed rollers, pressure bars,
chip breakers, and bed rollers. Also a great setup
tool for other machines! Accurate to 0.001".
Indicator rotates 360˚.
Figure 2. Rotacator™ Precision Planer Tool is
an important tool for setting up your planer for
the highest quality results.