Grizzly H8155 - Manual (Page 18)

-16-
H8155 MIG Welder
Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine
MUST maintain the original location and readability of the labels on the machine. If any label is
removed or becomes unreadable, REPLACE that label before using the machine again. Contact
Grizzly at (800) 523-4777 or www.grizzly.com to order new labels.
Replacement Parts And Labels
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PH8155001 WELDERS MASK 12 PH8155012 HANDLE
2 PH8155002 MASK HANDLE 13 PH8155013 WIRE FEED ASSEMBLY
3 PH8155003 LENSE RETAINING CLIP 14 PH8155014 WIRE SPOOL RETAINING NUT
4 PH8155004 MASK LENSE 15 PWN02 WING NUT 1/4-20
5 PH8155005 UTILITY BRUSH AND SLAG HAMMER 16 PH8155016 WELDING TORCH ASSEMBLY
6 PH8155006 CONTROL TIP WRENCH 17 PH8155017 WORK CLAMP ASSEMBLY
7 PH8155007 CONTROL TIP 18 PH8155018 MACHINE ID LABEL
8 PH8155008 WELDING TORCH NOZZLE 19 PLABEL-14 ELECTRICITY LABEL
9 PH8155009 GAS INLET TUBE 20 PH8155020 SHOCK WARNING LABEL
10 PH8155010 HANDLE BRACKET 21 PLABEL-12 READ MANUAL 2" X 3 5/16"
11 PHTEK11 TAP SCREW #8 X 3/4
1
2
3
4
5
6
7
8
9
10
11
12
16
17
18
19
20
21
14
15
13