Garmin ZUMO 200 - Manual (Page 53)

zūmo 200 Series Owner’s Manual 
Appendix
Problem/Question Solution/Answer
The touch screen is not
responding to my touches
properly.
Calibrate the touch screen as described on page 40 .
How do I know my zūmo
is in USB mass storage
mode?
When your zūmo is in USB mass storage mode, a picture of a
zūmo connected to a computer is shown. Also, you should see
two new removable disk drives listed in My Computer .
My computer never
senses that the zūmo is
connected.
1. Unplug the mini‑USB cable from your computer.
2. Turn the zūmo off.
3. Plug the mini‑USB cable into a USB port on your computer
and into your zūmo. The zūmo automatically turns on and
goes into USB mass storage mode. Ensure that your zūmo is
connected to a USB port and not a USB hub.
I cannot see any new
removable drives in my list
of drives.
If you have several network drives mapped on your computer,
Windows can have trouble assigning drive letters to your zūmo
drives. See your operating system Help file to learn how to map
or assign drive letters.
How can I find restaurants
near the hotel I will be
staying at in the future?
1. Touch Where To? > near > Different City (and enter your
vacation destination).
2. Find the hotel, and touch Go! .
3. Touch Menu > Where To? > near > My Destination .
4. Search for a restaurant. Restaurants nearest your hotel are
listed first.
You can also use the GPS simulator ( Tools > Settings >
System ).