Garmin ZUMO 200 - Manual (Page 11)

zūmo 200 Series Owner’s Manual 
Getting Started
Installing Your zūmo in the
Mount
1. Fit the bottom of your zūmo into the
cradle.
2. Tilt the zūmo back until it snaps into
place.
Cradle
Release lever
Removing Your zūmo from
Either Mount
1. Press the release lever on the top of
the mount to release the zūmo.
2. Lift out the zūmo.
Configuring the zūmo
To turn on your zūmo, press and hold
. Follow the on-screen instructions.
Acquiring Satellites
Go outdoors to an open area, out of
garages, and away from tall buildings.
Stop your vehicle, and turn on the zūmo.
Acquiring satellite signals may take a
few minutes.
The
bars indicate satellite
strength. When the bars are green, the
zūmo has acquired satellite signals. Now
you can select a destination and navigate
to it.