GE Monogram ZBD4700XWW - Manual (Page 2)

Revised 7/97
Monogram. ™
UL
R
Listed by
Underwriters
Laboratories
For answers to your GE Monogram, ™ GE Profile, ™
GE, Hotpoint and RCA appliance questions, call
GE Answer Center
® service, 800.626.2000.
ZBD4700XWW—Dishwasher with stainless steel interior
Dimensions and Specifications (in inches)
Cut 1/4" thick door panel: 23-1/4" wide, 22-11/16" high.
Cut 1/4" thick access panel: 23-1/4" wide 1-1/2" high.
Cut edges of the panels will be concealed by the trim.
Cut a notch in the top corners of the door panel. 1/8"
wide and 3/16" deep. This will allow the panel to slide
under the escutcheon. The bottom corners of the door
panel trim and all 4 corners of the access panel trim
are rounded. Therefore, for a good fit, a 5/16" radius
cut is required.
1/4" Thick
Door Panel
22 11/16"
1 1/2"
23 1/4"
1/4" Thick Access Panel
5/16"
Radius
Cut
Notch 1/8"
3/16"
1/4" Custom Door and Access Panel Dimensions