Genie TZ-50 - Manual (Page 26)

24 Genie TZ-50 Part No. 82900
Operator's Manual First Edition • Sixth Printing
Platform Overload Indicator
Light (if equipped)
Light flashing indicates the platform
is overloaded and no functions will
operate.
Remove weight from the platform
until the light goes off.
Fall Protection
Personal fall protection equipment (PFPE) is
required when operating this machine.
All PFPE must comply with applicable
governmental regulations, and must be inspected
and used in accordance with the PFPE
manufacturer’s instructions.
OPERATING INSTRUCTIONS
Optional Drive System
Operation
1 Be sure the platform is fully lowered. The drive
function will not operate unless the platform is
fully lowered.
2 Set the parking brake on the tongue.
3 Manually engage the drive wheels by pulling the
drive wheel lever toward the tire on each side of
the machine.
ANSI models: Operate the drive system from the
platform using the drive control box mounted next
to the platform. Press and hold the blue function
enable button. Press and hold the auto level button
to raise the outriggers.
Note: The drive system control box can be
detached from the machine and used while
standing on the ground. Remove the drive control
box from its mounting and step away from the
machine to drive.
CE models: At the ground controls, press and hold
the blue function enable button. Press and hold the
auto level button or the individual outrigger buttons
to raise the outriggers. Operate the drive controls
from the ground using the control box mounted next
to the ground controls. Remove the drive control
box from its mounting and step away from the
machine to drive.
4 Press and hold the function enable button on the
drive control handle.
5 Move the drive control handle off center. Use
the color-coded direction arrows on the control
panel to determine the direction of machine
travel.
6 Before raising the platform, lower the outriggers
and adjust to level the machine and raise the
wheels off the ground.
Note: Use the bubble level to make sure the
machine is level.