Using coaxial (rf) audio and video (vcr only), Warning – Gateway GTW-P46M103 User Manual
Page 28
24
Chapter 2: Connecting Components
www.gateway.com
Using coaxial (RF) audio and video (VCR only)
To connect your VCR using coaxial (RF) audio and video:
1
Connect the “output to TV” (RF out or Antenna out) jack on the back of
your VCR to the TV In connector on the back of your plasma TV.
2
Select the TV/Cable input using the Input button on the front of your
plasma TV.
If you have an off-air antenna or cable box, connect your off-air antenna or
cable TV cable to the ANT connector on the back of your VCR.
Warning
If an outdoor antenna or cable system is connected to your
plasma TV, make sure that the antenna or cable system
is correctly grounded. For more information, see
“Television antenna connectors protection (for systems
fitted with TV/cable TV tuner cards)” on page 45.
09161.book Page 24 Friday, July 18, 2003 2:02 PM