Grizzly H3122 - Manual (Page 12)

-10- H3122 Classical Guitar Kit
In preparation for the finish coating, protect
the following parts of the guitar (Figures 8 &
9):
• Bridge Mounting Location
• Fingerboard
• Sound Hole (Hole Filled With Newspaper)
Use a small stick of wood to carefully press all
the masking tape edges securely to the guitar
pieces. The finish coat can seep under these
edges, especially near corners, uneven edges,
and where the frets meet the fingerboard. Note—
Failure to correctly mask off these areas could
result in unrepairable damage to the guitar.
Figure 8. Masked bridge area and
blocked sound hole.
Figure 9. Masked fingerboard.
Covered Areas