GE JKP18 EN - Manual (Page 19)

19
Safety Instructions
Operating Instructions
Care and Cleaning
Troubleshooting T
ips
Consumer Support
www.GEAppliances.com
How to Set a Delayed Start and Automatic Stop
You can set the oven control to delay-start the
oven, cook for a specific length of time and then
turn off automatically.
Make sure the clock shows the correct
time of day.
Press the CONVECTION BAKE pad.
Press the number pads to set the
desired oven temperature.
Press the COOKING TIME pad.
NOTE: If your recipe requires preheating, you
may need to add additional time to the length of
the cooking time.
Press the number pads to set the
desired cooking time.
Press the DELAY START pad.
Press the number pads to set the
time of day you want the oven to
turn on and start cooking.
If you would like to check the times you have set,
press the DELAY START pad to check the start time
you have set or press the COOKING TIME pad to
check the length of cooking time you have set.
Press the START pad.
NOTE: An attention tone will sound if you are
using timed baking and do not press the START
pad after entering the baking temperature.
When the oven turns on at the time
of day you have set, the display will
show the changing temperature
(starting at 100°F) and the cooking
time countdown.
NOTE: On double oven models when using both
ovens at the same time, the times showing in the
display will be for the last oven set. To display the
time set for the first oven set, press the DELAY
START or COOKING TIME pad for that oven.
At the end of timed convection bake the
oven will turn off. The end of cycle tone
will sound.
Press the CLEAR/OFF pad to clear the
display if necessary. When baking is
finished, remove the food from the
oven. Remember, even though the
oven shuts off automatically, foods
continue cooking after the controls
are off.