Grizzly G1029Z - Manual (Page 15)

g1028z/g1029z dust Collector
-13-
inventory
the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
inventory: Qty
a. Collector Body assembly ........................... 1
b. Base ........................................................... 1
C. upper Bag (Fabric) ..................................... 1
D. lower Bag (plastic) .................................... 1
E. lower support Brackets ............................. 2
f. Casters ....................................................... 4
G. rubber gasket ........................................... 1
h. upper support Bracket ............................... 1
i. outlet .......................................................... 1
J. outlet hose ................................................ 1
K. hose Clamps .............................................. 2
L. Flange Bolts 5 ⁄
16
"-18 x 1 ⁄
2
" ......................... 36
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
floor Load
refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
some residential floors may require additional
reinforcement to support both the machine and
operator.
placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. see
figure 3 for the minimum
working clearances.
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
Site Considerations
figure 3. minimum working clearances.
33 1 ⁄
2
"
21 1 ⁄
4
"