GE D-GES7600 User Manual

Page 48

Advertising
background image

User’s Manual

44

Manageable 8/9-Port Switch

Step 2: Host
Move to highlight Host, and press <enter>.

Step 3:
Enter 4 decimal bytes (dot separated) as the IP address to ping.

Step 4: Count
Move to highlight Count, and press <enter>.

Step 5:
Specify a packet count number from 1 to 999, or type 0 for an infinite packet count,
and press <enter>.

Step 6: Size (bytes)
Move to highlight Size, and press <enter>.

Step 7:
Specify a packet size from 0-1500, and press <enter>.

Step 8: Timeout (sec)
Move to highlight Timeout, and press <enter>.

Step 9:
Specify a timeout value from 1-999, and press <enter>.

Step 10:
Press <esc> to start to ping when completed with the ping parameters.

Advertising