Garmin HM210DP/DI - Manual (Page 30)

Basic Configuration
22 EN/LZT 108 6492 R2 - October 2003
Enter the provided fields as below:
Field Description
VC Interface: Select a VC interface from the available
interfaces, e.g. aal5-0.
VPI and VCI: Enter the VPI/VCI values given by your ISP, e.g.
0/33.
Mux Type: Select LLC or VC as required by your ISP.
Max Proto per AAL5: This setting indicates the number of higher-level
interfaces that the VC can support (the higher
level interfaces can be PPP, EoA, or IpoA
interfaces). Contact your ISP to determine wich
connection protocol(s) they require.
3. After entering the fields above, click the Submit button and when
the confirmation page appears, click Close.
4. You will return to the ATM VC Configuration table and see the
newly added ATM VC entry: