GE 21011 - Manual (Page 51)

51
H
EADSET AND
B
ELT
C
LIP
I
NSTALLATION
C
ONNECTING AN
O
PTIONAL
H
EADSET TO THE
H
ANDSET
Each handset may be used with an optional headset for hands free operation.
1. Remove the rubber cap covering the headset jack.
2. Connect the headset to the headset jack on the side of the handset. The
handset receiver and speakerphone microphone are disabled when the
headset is connected.
3. Adjust the headset to rest comfortably on top of your head and over
your ear. Move the microphone to approximately two to three inches
from your mouth.
4. Press the talk/callback button on the handset to answer a call or make
calls with the headset.
5. To return to normal operation, unplug the headset from the jack.
A
TTACHING THE
B
ELT
C
LIP
To attach the belt clip, insert the sides of the belt clip into the slots on each
side of the handset. Snap the ends of the belt clip into place.
Headset
jack
Headset
plug
Slot for
belt clip Slot for
belt clip