GE Profile JGSP28DENWW - Manual

All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range. R
Listed by
Underwriters
Laboratories
JGSP28DEN
GE ® 30" Slide-In Gas Range with Self-Cleaning Oven
Specification Revised 7/09
330231
For answers to your Monogram, ® GE Profile ™ or
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center ® service,
800.626.2000.
If you are NOT using the
optional Filler or Backguard:
23-3/16
30
If you are using the optional
Filler or Backguard:
25
30
Rear filler strip or backguard are available for
these ranges
Note: Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
placed to avoid interference with the handle
Note: Cabinets installed adjacent to slide-in ranges must
have an adhesion spec of at least 194° temperature rating.
Optional Kits for Slide-In Gas Ranges:
(Available at additional cost)
Lower/Side Trim Kits
JXS56WW - Lower Trim Kit (White)
JXS56BB - Lower Trim Kit (Black)
Accessory Backguards
JXS32BB - Black Accessory Backguard
JXS37BB - Black Glass Accessory Backguard
JXS32WW - White Accessory Backguard
JXS37WW - White Glass Accessory Backguard
JXS37CC - Bisque Accessory Backguard
Rear Filler Strip
WB07T10680 - Black Filler Strip Assembly
WB07T10681 - White Filler Strip Assembly
WB07T10682 - Bisque Filler Strip Assembly
Installation Information: Before installing, consult
installation instructions packed with product for current
dimensional data.
Dimensions and Installation Information (in inches)
Counter Cutout Dimensions (in inches)
29-15/16” min.
30-1/16” max.
35-7/8”–38” from
floor to countertop
For optimum
installation these
surfaces must be
flat and level
Follow instructions
packaged with
alternate appliance
30” min. from
cooking surface
to bottom of
overhead
cabinets
18” min. vertical distance
from the bottom of the
adjacent overhead cabinets
Countertop depth
25” (typical)
1-1/4” min. countertop
to top of drawer
6” min. from walls
23-3/16”
24” min.
30” min.
13” max.
depth
15”
7”
Max. depth
of cord, plug,
recept. box &
gas hookup
3.5” to prevent
interference
with drawer
Acceptable Gas Line &
Electrical Outlet Area 3”
12”
29-15/16” min.
30-1/16” max.
35-7/8”–38” from
floor to countertop
For optimum
installation these
surfaces must be
flat and level
Follow instructions
packaged with
alternate appliance
30” min. from
cooking surface
to bottom of
overhead
cabinets
18” min. vertical distance
from the bottom of the
adjacent overhead cabinets
Countertop depth
25” (typical)
1-1/4” min. countertop
to top of drawer
6” min. from walls
23-3/16”
24” min.
30” min.
13” max.
depth
15”
7”
Max. depth
of cord, plug,
recept. box &
gas hookup
3.5” to prevent
interference
with drawer
Acceptable Gas Line &
Electrical Outlet Area 3”
12”