Grizzly G8694 - Manual (Page 13)

The Model G8694/G8695/G8889 Air
Compressors are specifically designed for air
tool operation.
DO NOT MODIFY AND/OR
USE THIS MACHINE FOR ANY OTHER PUR-
POSE. Modifications or improper use of this
tool will void the warranty.
If you are con-
fused about any aspect of this machine, DO
NOT use it until you have answered all your
questions. Serious personal injury may
occur.
Like all power tools, there is danger asso-
ciated with operating this equipment.
Accidents are frequently caused by lack of
familiarity or failure to pay attention. Use
this tool with respect and caution to lessen
the possibility of operator injury. If normal
safety precautions are overlooked or
ignored, serious personal injury may
occur.
-12-
G8694/G8695/G8889 Air Compressors
Weekly
Every 300 Hours
If the compressor is used on a regular daily basis,
perform the following checks each week:
1. Rinse the air filter foam element in water.
2. Check for loose bolts or fittings.
After every 300 hours or 3 months of regular
operation, perform the following maintenance
items:
1. Change compressor motor oil.
2. Rinse the air filter foam element in water.
3. Check for air leaks and correct as needed.
4. Clean cylinder head fins for proper cooling.
5. Check for loose bolts or fittings.
After First 50 Hours
After the first 50 working hours, or 30 days,
whichever comes first, replace the oil in the
motor with compressor oil (use ISO 100 or SAE
30W viscosity, non-detergent type).
Also after this initial operation period, check to
make sure that all the fittings are tight. Remove
the air filter foam element and rinse it out in
water. Allow it to dry and reinstall.
Blow out any accumulated dirt between the cylin-
der cooling fins.