GE DECT6.0 28128 - Manual (Page 21)

1
Language
This menu allows you to change the language of the display and voice prompts on
the base.
from the Phone Settings menu:
1. Use the or button to scroll to Language.
. Press the Select (SKL) button to enter the menu.
. Use the
or button to scroll to the desired language. The default is English.
4. Press the Select (SKL) button to save your selection. You will hear a confirmation
tone.
NoTE: The voice prompt language is the same as the display
prompt language setting at the base.
Date/Time
from the Phone Settings menu:
1. Use the or button to scroll to Date/Time.
. Press the Select (SKL) button to enter the menu. Date time setup shows on the
display.
. Use the number keys to enter the year and date.
4. Press Next (SKL) button to move to time setup.
5. Use the number keys to enter the time and use
or button
to select AM or PM.
6. Press the Store (SKL) button to save the setting. You will hear a confirmation tone.
Set Area Code
If you enter your local -digit area code in the area code menu, your local area code
does not display on the Caller ID (CID) list. Instead, you only see the local 7-digit
number. Calls received from outside your local area code will display the full 10-digits
from the Phone Settings menu:
1. Use the or button to scroll to Set Area Code.
. Press the Select (SKL) button to enter the menu.
. Use the number keys to enter your  digit area code. “ - - - “ is the default setting.
4. Press the Store (SKL) button to save the setting. You will hear a confirmation tone.
NoTE: To restore the default setting to “---”, press and release the
DELETE/fLASH button when Set Area Code shows on the display.