Gefen EXTRA LONG RANGE EXTENDER GTB-HDKVM-ELR - Manual (Page 8)

5
1 USB LINK
Transmits the USB signals from the Sender Unit to the Receiver Unit using
CAT-5e / CAT-6 cable.
2 LINK
Transmits the HDMI, Ethernet, and IR signals from the Sender Unit to the
Receiver Unit using CAT-5e / CAT-6 cable.
3 ETH
Connect a CAT-5 cable from a port on a local Ethernet switch to this jack.
The HDKVM Extra Long Range Extender supports 10/100BaseT Ethernet.
4 IR
Connect an IR Blaster cable (Gefen part no. EXT-2IREMIT) from this port to the
Hi-Def source to control the source from the viewing location.
5 5V DC
Connect the included 5 V DC locking power supply to this connector.
6 PWR
This LED will glow red once the included 5 V DC locking power supply has
been properly connected to the unit and the locking power supply has been
connected to an available electrical outlet.
7 HDMI In
Connect an HDMI cable from the Hi-Def source to this HDMI connector.
8 USB Indicator
This LED glows green when a USB device is connected to the Sender Unit.
9 USB In
Connects the Sender Unit to the computer using a USB cable.
SENDER UNIT DESCRIPTIONS