Grizzly H8208 - Manual (Page 5)

Model H8208 50-Piece Air Tool Set -3 -
INTRODUCTION
Air Ratchet
Drive Size................................................ 3 ⁄
8
"
No Load Speed............................160 RPM
Max. Torque.......................50 ft/lb (68N.m)
Air Inlet.....................................................
1 ⁄
4
"
Air Hose ID............................................... 3 ⁄
8
"
Operating Air Pressure.....................90 PSI
Min. Required Air Flow.....................4 CFM
Max. Sound Level.............................103 dB
Weight................................................2.4 lbs
Impact Wrench
Drive Size................................................ 1 ⁄
2
"
No Load Speed..........................7000 RPM
Max. Torque...................230 ft/lb (310N.m)
Air Inlet.....................................................
1 ⁄
4
"
Air Hose ID............................................... 3 ⁄
8
"
Operating Air Pressure.....................90 PSI
Min. Required Air Flow.....................8 CFM
Max. Sound Level.............................104 dB
Weight................................................4.8 lbs
Air Hammer
Chisel Shank OD...............................10mm
Bore Diameter........................................
3 ⁄
4
"
Blows Per Min......................................4500
Air Inlet.....................................................
1 ⁄
4
"
Air Hose ID............................................... 3 ⁄
8
"
Operating Air Pressure.....................90 PSI
Min. Required Air Flow.....................3 CFM
Max. Sound Level.............................108 dB
Weight................................................2.9 lbs
Specifications Foreword
The specifications, details, and
photographs in this manual represent
the Model H8208 as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no
obligation on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com