Golden Technologies GP215 - Manual (Page 17)

Alante DX/LT Owner’s Manual Rev A_011811
IV. ASSEMBLY
Joystick Installation
1. Insert the joystick mounting tube into one of the mounting tubes under the armrest
pads.
Figure 9
2. Adjust the position of the joystick to a comfortable spot.
3. Tighten the joystick adjustment screw with a 4mm Allen wrench.
Figure 10
4. Secure the joystick cable to the arm with the cable retaining straps.
16
Joystick
adjustment screw
Battery Charge
LED Array
ON-OFF Button
Horn Button
Speed Setting
LED Array
Speed Setting
SLOWER
Speed Setting
FASTER
Top View Bottom View
Joystick
mounting tube
Mounting
tube (Arm)
Joystick
adjustment
screw