Grizzly 12" Jointer w/spiral cutterhead manual insert g0609X - Manual (Page 42)

G0609 12" Parallelogram Jointer
-27-
SECTION 5: ACCESSORIES
Figure 32. G3631 Jointer/Planer Knife Hone.
G3640—Power Twist ® V-Belt - 1 ⁄
2
" x 48"
Smooth running with less vibration and noise
than solid belts. The Power Twist
® V-belts can
be customized in minutes to any size—just add
or remove sections to fit your needs. Size:
1 ⁄
2
" x
48"; replaces all "A" sized V-belts. Requires three
Power Twist
® V-belts to replace the stock V-belts
on your Model G0609.
Figure 30. G3640 Power Twist ® V-Belt.
H9291—12" Shellix Spiral Cutterhead
Made in the USA by Byrd
® , these indexable
carbide insert cutterheads are very well
made and leave a great finish. The inserts
are not only placed along a spiral pattern,
they are also at an angle so that the
shearing action leaves a glassy smooth cut on the
toughest of woods. Each cutterhead comes with 5
extra replacement inserts.
Figure 31. H9291 Spiral Cutterhead.
G3631—Jointer/Planer Knife Hone
Add a razor hone to your planer and jointer knives
with this hand-held sharpening device. This handy
tool sharpens flat and beveled surfaces quickly
and easily. Great for touch-ups.
Figure 33. Model H2404 Jointer Pal ® .
H2404—Jointer Pal ® Magnetic Knife Jig (Up to
12" Carbide or HSS)
This patented knife-setting systems lets you set
jointer knives in perfect alignment every time!
It also allows you to shift nicked knives to get a
perfect cut to an accuracy of + or - .001”. Patents
owned by Woodstock International, Inc.