Grizzly H7677 - Manual (Page 6)

H7677 18 Gauge Stapler Kit -6 -
SECTION 2: INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H7677 18 Gauge Stapler Kit. This model
is part of a growing Grizzly family of fine
pneumatic tools. When used according to
the guidelines set forth in this manual, you
can expect years of trouble-free, enjoy-
able operation and proof of Grizzly’s com-
mitment to customer satisfaction.
This stapler features 360˚ adjustable
exhaust, a top-loading magazine, a safe-
ty trigger and a durable plastic carrying
case.
The specifications, details, and photo-
graphs in this manual represent the Model
H7677 as supplied when the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Foreword Contact Info
Tool Data
Staple Size ................................. 18 Gauge
Staple Length .....................................
1 ⁄
2
"-1"
Staple Crown .......................................... ¼"
Magazine Capacity .................. 100 Staples
Air Inlet ...........................................¼" NPT
Weight ................................................2 lbs.
Operating Pressure .................. 60-100 PSI
Read the manual before operation.
Become familiar with this stapler, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety or
operational information is not under-
stood or followed.