Grizzly H6143 - Manual (Page 12)

H6143 16 Ga. Finish Nailer -10 -
A jammed nail must be cleared before using
the nailer again.
To clear a jammed nail from the dis-
charge area:
1. DISCONNECT NAILER FROM THE
AIR SUPPLY!
2. Pull back and latch the magazine
pusher.
3. Remove the nail stick from the maga-
zine.
Clearing Jammed
Nails
Figure 7. Nose opened to clear a jam.
Nose Cover
Nose Release
Nose Tip
4. Open the nailer nose by removing the
rubber nose tip, squeezing the nose
release mechanism (
Figure 7), and
opening the nose cover.
5. Dislodge the jammed nail with a tool
that will fit in the slot on the underside
of the nose.
6. Throw the damaged nail away and
insert a new nail stick that only contains
clean, undamaged nails. DO NOT use
dirty or damaged nails!
7. Release the catch lever and let the
pusher slide to the front of the maga-
zine.