GN Netcom GN 9120 User Manual

Page 4

Advertising
background image

2

3

About the GN 9120

The GN 9120 is a cordless headset solution, made up of a cordless headset and a base
unit that is connected to your telephone. The GN 9120 gives you full mobility, hands-
free convenience and superior sound quality for your telephone conversations.

Assembling

To integrate the unit to your telephone:
1. Disconnect the handset cord from the telephone’s handset

socket and connect it to the socket marked

0 on the base unit

(1).

2. Connect the connection cord (8) to the telephone’s handset

socket.

3. Connect the power adapter (9) to the socket marked

2 at the

bottom of the base unit and then connect to a power socket.

4. Insert the base unit into the foot (7) and turn until secure.
5. If your telephone has volume control, set the volume to the

middle setting.

6. Place the headset into the base unit for battery charging.

Battery charging and assembly verifi cation

Initial battery charging
The battery in the headset is not initially charged and will require a
minimum of 20 minutes of charging before use. It takes 1.5 hours
before the battery is fully charged, providing up to 8 hours of talk
time.

The battery charging indicator (1d) on the base unit will fl ash con-
tinuously during charging and will light when the battery is fully
charged.

Note: The headset may become warm during battery charging.
This is normal and will not affect the safety or performance of the
headset.

English - GN 9120 user guide

This user guide provides you with information and instructions on assembling, using
and maintaining your GN 9120. This guide contains the following sections:

• About the GN 9120
• Assembling
• Battery charging and assembly verifi cation
• Features and customisation
• Answering and making telephone calls
• Frequently asked questions
• Operational and safety information

Box contents:

1. Base

unit

1a)

On-line

indicator

1b)

Link-up

indicator

1c)

Mute

indicator

1d) Battery re-charge indicator

1e)

Telephone

Termination

Switch (back)

2. Headset
2a)

On-line

indicator

2b) Volume – button

2c)

Volume

+

button

2d)

Multifunction

button

3. Headband
4. Earhook
5. Earplate
6. Earcushion
7. Base

foot

8. Connection

cord

9. Power

adaptor

GN9120_contents_usa_version 110403.indd 2-3

11-04-2003, 15:53:07

Advertising