Grizzly 230V User Manual
Page 7
H8151 230V Mini Welder
-5-
4. ELECTRIC SHOCK. DO NOT touch live
electrical parts. Connect welder to power
source with approved earth ground. Make
sure all electrical connections are tight,
clean, and dry. Connect workpiece to
approved earth ground. The work lead is
NOT a ground connection and is to be
used only to complete the working welding
circuit.
5. PREVENT FIRES. Welding work zones
must be kept clear of flammable liquids,
such as gasoline and solvents; combus-
tible solids, such as paper and wood; and
flammable gases, such as acetylene and
hydrogen. Provide approved fire barriers
and fire extinguishing equipment for the
welding zone. Stay alert for sparks and
spatter thrown into cracks and crevices that
can start a smoldering fire.
6. PROTECT BODY FROM ARC BURNS,
SPARKS, AND SPATTER. Wear correct
and approved eye, ear, and body protec-
tion. Wear complete body protection, such
as clean and oil-free protective clothing,
leather gloves, protective cap, heavy long-
sleeve shirt, cuffless pants, and high leath-
er boots. DO NOT wear jewelry or frayed
clothing. Use a welding helmet with correct
shade of filter for the operation. Protect
other people and property in your work-
ing zone from exposure to arc radiation,
sparks, and spatter.
7. WORKING AREA. Keep working area clear
of any material not involved in the welding
operation. Keep all equipment, workpieces,
and work surfaces clean, dry, and free of
entanglements. Keep lead cables orga-
nized and away from your body.
8. AVOID EXPLOSION HAZARD. Never
weld on closed containers or containers
with fumes inside. Containers should be
prepared per American Welding Society
Publication F4.1, Section 7.
8. ELECTRIC AND MAGNETIC FIELDS
(EMF). Welding operations create EMF
around the welding equipment and
workpieces. Workers who have pacemak-
ers must consult with their physician before
using this equipment or being within 50 feet
of welding operations.
9. EQUIPMENT MAINTENANCE. Make sure
equipment inspections and maintenance
are performed by a qualified person as
required. Stop the welding operation and
disconnect the welder from power if the
equipment is damaged or malfunctions.
10. EXPERIENCING DIFFICULTIES. If you
are experiencing difficulties performing the
intended operation, stop using the equip-
ment. Contact our Technical Support
Department at (570) 546-9663.
Additional Safety Instructions for
Shielded Metal Arc Welders (SMAW)
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other equipment with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all equipment there is potential danger
when operating this welder. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this welder with
respect and caution to lessen the possibility
of operator injury. If normal safety precau-
tions are overlooked or ignored, serious
personal injury may occur.