Grizzly H7758/H7759 - Manual (Page 13)

H7758/H7759 8" & 10" Bench Grinders
-11-
Inventory &
Assembly
Use the list below and Figures 1 & 2 to inventory
and assemble your grinder.
H7758 Box Inventory Qty
A. Grinder ....................................................... 1
B. Eye Shields (DO NOT OVERTIGHTEN) .... 2
C. Support Arms ............................................. 2
D. Support Retainers ...................................... 2
E. Eyeshield Bracket Assemblies ................... 2
F. Tool Rests .................................................. 2
G. Hex Bolts M8-1.25 X 14 ............................. 2
H. Hex Bolts M8-1.25 X 10 ............................. 2
I. Hex Bolts M6-1 X 6 .................................... 2
J. Flat Washers 8mm ..................................... 6
K. Flat Washers 6mm ..................................... 2
L. Spark Deflectors ......................................... 2
M. Phillips Head Screws M4-.7 X 10 ............... 4
N. Flat Washers 4mm ..................................... 4
O. Lock Washers 4mm ................................... 4
P. Hex Nuts M4-.7 .......................................... 4
EYE SHIELDS are the first level of protec-
tion from flying debris or sparks and MUST
be installed before operating the grinder.
Figure 1. H7758 assembly.
E C
D
L
F
G, J
H, J
B
M, N, O, P
I, K
Figure 2. H7759 assembly.
E C
D
J
F
G, I
H
B
K, L, M, N
H7759 Box Inventory Qty
A. Grinder ....................................................... 1
B. Eye Shields (DO NOT OVERTIGHTEN) .... 2
C. Support Arms ............................................. 2
D. Support Retainers ...................................... 2
E. Eyeshield Bracket Assemblies ................... 2
F. Tool Rests .................................................. 2
G. Hex Bolts M8-1.25 X 14 ............................. 2
H. Star Knobs M6-1 x 10 ................................ 2
I. Flat Washers 8mm ..................................... 2
J. *Spark Deflectors ....................................... 2
K. Phillips Head Screws M4-.7 X 10 ............... 4
L. Flat Washers 4mm ..................................... 4
M. Lock Washers 4mm ................................... 4
N. Hex Nuts M4-.7 .......................................... 4
* The Spark Deflectors (J) attach with the screw,
hex nut, and washer that holds the wheel cover
in place.
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
NOTICE
Some hardware/fasteners in the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming any
items from the inventory list are missing.