GE 164D3333P159 - Manual (Page 50)

Before you call for service…
50
Troubleshooting Tips
Problem Possible Causes What To Do
“F—and a number” You have a function • Disconnect all power to
flash in the display error code. the range for 5 minutes
and then reconnect power.
If the function error code
repeats, call for service.
• On self-cleaning models,
if a function error code
appears during the self-
cleaning cycle, check the
oven door latch. The latch
may have been moved,
even if only slightly, from
the locked position.
Make sure the latch is
moved to the right as far
as it will go. Turn the Oven
Temperature knob to
OFF. Allow the oven to
cool for one hour. Put the
oven back into operation.
Power outage Power outage or surge. • Some models will
automatically resume their
setting once the power is
restored. On models with a
clock, you must reset the
clock. If the oven was in
use, you must reset it by
turning the Oven
Temperature knob back to
OFF
, setting the clock and
resetting any cooking
function.
Operating Instructions
Installation Instructions
Safety Information
Tr
oubleshooting T
ips
Customer Service