Installation instructions, Fitting and removal of baffle – Stovax REGENCY 1000 User Manual

Page 19

Advertising
background image

19

PR7219R

Self tappping

screw at rear

Flue Pipe 915mm (3ft)

Size

Stovax Part No.

*5"

4502

6"

4602

Seal flue collar

with Fire Cement

Flue Adapter

Size

Stovax Part No.

8"

4819

INsTAllATIoN INsTRUCTIoNs

PR7220R

600mm min

1000mm max

unsupported

Elbow with access cover

Size

Stovax Part No.

8"

4812

Flue Pipe 915mm (3ft)

Size

Stovax Part No.

8"

4810

To chimney connection

as detailed in building

regulations

Flue Adapter

Size

Stovax Part No.

8"

4819

1.3 Rear flue pipe installation

• Insert a tee into the flue collar

The tee piece is used as cleaning access.

• Lift appliance into position

Take care not to damage the hearth finish.

• Level using adjustable bolts, see picture 1

• Connect tee to the chimney using flue pipe

• Secure with self tapping screw

• Seal the connecting joints

Do not use a 90˚ elbow to make this connection

The Flue must be installed in accordance with

manufacturers instructions.

Flue Adapter

Size

Stovax Part No.

8"

4819

PR7218R

Seal collar with fire cement

Self tapping screw

Tee

Size

Stovax Part No.

8"

4817

Cap

PR7221R

600mm min

1000mm max

unsupported

Elbow with access cover

Size

Stovax Part No.

8"

4812

Flue Pipe 915mm (3ft)

Size

Stovax Part No.

8"

4802

Flue Adapter

Size

Stovax Part No.

8"

4819

2. FITTING ANd ReMoVAl oF BAFFle

2.1 To maintain safe and efficient combustion the appliance is

fitted with a baffle in the top of the firebox.

2.2 Allow the appliance to cool fully before removing baffle

system.

2.3 To remove the baffle, lift the baffle plate, rotate it and then

slide it out through the front.

2.4 It is important to remove and clean the baffle system to

ensure the flue ways are clear of soot and debris and to

ensure the safe and efficient operation of the appliance.

The frequency of cleaning will depend on the appliance

operating conditions.

2.5 Replace any damaged baffles immediately.

2.6 Do not modify the baffle system.

2.7 To remove the baffle, lift the baffle plate, rotate it and then

slide it out through the front.

2.8 Replacement is the reverse of the above.

Advertising
This manual is related to the following products: