Genie Z34N-2100 Z-34 - Manual (Page 13)

Part No. 43654 Genie Z-34/22 & Genie Z-34/22N 11
Operator's Manual Second Edition • Ninth Printing
Pre-operation Inspection
! Be sure that the operator's, safety and
responsibilities manuals are complete, legible
and in the storage container located on the
platform.
! Be sure that all decals are legible and in place.
See Decals section.
! Check for hydraulic oil leaks and proper oil level.
Add oil if needed. See Maintenance section.
! Check for battery fluid leaks and proper fluid
level. Add distilled water if needed. See
Maintenance section.
Check the following components or areas for
damage, modifications and improperly installed or
missing parts:
! Electrical components, wiring and electrical
cables
! Hydraulic power unit, tank, hoses,
fittings, cylinders and manifolds
! Drive and turntable motors and drive hubs
! Boom wear pads
! Tires and wheels
! Limit switches, alarms and horn
! Nuts, bolts and other fasteners
! Platform entry mid-rail bar or gate
PRE-OPERATION INSPECTION
Check entire machine for:
!
Crack in welds or structural components
! Dents or damage to machine
! Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.
! Be sure that both battery packs are in place,
latched and properly connected.
! After you complete your inspection, be sure that
all compartment covers are in place and
latched.