Garmin HN294DP/DI - Manual (Page 54)

Advanced Configuration
48 EN/LZT 108 6377 R4 - September 2003
9.6.2.2 DHCP Server
The Configuration > LAN > DHCP Server page allows you to configure
the built-in DHCP Server.
The HN294d incorporates a DHCP (Dynamic Host Configuration Protocol)
server, which dynamically assigns IP addresses and serves as a DNS
server to the PCs on the LAN/WLAN. DHCP functionality spares you the
hassle of manually assigning a fixed IP address to each PC on the
LAN/WLAN.
NOTE! By default the DHCP Server is enabled on the private LAN
interface (192.168.0.1) but if you already have a DHCP server on
your network, you should disable this function.
Enable and configure the DHCP server:
Select the Enabled radio button and click the Configure button. The
following page appears: