Gefen GTV-HTS-PRO - Manual (Page 8)

5
PANEL DESCRIPTIONS
1 - Power On LED
When this is lit, the Home Theater
Scaler Pro is powered up.
2 - I/R Sensor Port
Point the remote at this port to
control the Home Theater Scaler Pro
3 - Video Signal LED
When this is lit, video is passing
through the system.
4 - Component Signal LED
When this is lit, component audio
is passing through the system.
5 - HDMI - 1 Signal LED
When this is lit, HDMI Channel 1
is passing through the system.
6 - HDMI - 2 Signal LED
When this is lit, HDMI Channel 2
is passing through the system.
7 - Power On/Off Switch
This is the main power switch
for the unit.
8 - Composite Right Audio
Use this jack to input right channel
composite audio.
9 - Composite Left Audio
Use this jack to input left channel
composite audio.
10 - Composite Video
Use this jack to input composite
video.
11 - S-Video Input
Use this jack to input S-Video.
12 - Component Right Audio
Use this jack to input right channel
component audio.
13 - Component Left Audio
Use this jack to input left channel
component audio.
14, 15, 16 - Component Video
Channel Jacks
Use these jacks to input Component RGB.
17 - Mini USB Programming Input
Use this jack to update Firmware.
18 - S/PDIF Channel 1 Input Jack
Use this jack to input S/PDIF Audio Channel 1..
19 - TOSLINK Input Jack
Use this jack to input Toslink Audio.
20 - HDMI 1 Input Jack
Use this jack to input HDMI Channel 1
21 - Screw-Locking Point for HDMI
Screw-down HDMI jacks attach here.
22 - S/PDIF Channel 2 Input Jack
Use this jack to input S/PDIF audio Channel 2.
23 - HDMI 1 Input Jack
Use this jack to input HDMI Channel 1
24 - Screw-Locking Point
Screw-down HDMI jacks attach here.
25 - HDMI 1 Input Jack
Use this jack to input HDMI Channel 1
26 - Screw-Locking Point
Screw-down HDMI jacks attach here.
27 - TOSLINK Output
Use this jack to output TOSLINK Audio
28 - HDMI 1 Output Jack
Use this jack to output HDMI Channel 1
29 - Screw-Locking Point
Screw-down HDMI jacks attach here.
30 - 5VDC Power In Jack
Plug power jack in here.