Gefen EXT-HDMI1.3IR-FO-141 - Manual (Page 9)

6
CONNECTING AND OPERATING THE HDMI 1.3 Over Fiber with IR
1. Connect the HDMI source to the HDMI 1.3 Over Fiber with IR sending unit’s
HDMI input port using the supplied HDMI cable.
2. Connect the RS-232 source to the HDMI 1.3 Over Fiber with IR sending unit’s
RS-232 input port using the supplied DB-9 serial cable.
3. For IR repeater functionality, please connect the IR emitter’s mini-jack (sold
separately, part # EXT-2IREMIT) into the HDMI 1.3 Over Fiber with IR
sending unit. Place the IR emitter directly on or above the IR receiver of the
desired source device.
4. Connect the HDMI 1.3 Over Fiber with IR sending and receiving units
together using one user supplied SC terminated multi-mode fi ber optic cable
and one CAT-5, CAT-5e or CAT-6 cable.
NOTE: If fi eld terminating network cable, please adhere to the TIA/EIA568B
specifi cation. Please see page 7 for more information.
5. Connect the display to the HDMI output port of the HDMI 1.3 Over Fiber with
IR receiving unit using a user supplied HDMI cable.
6. Connect the RS-232 device to the RS-232 output port of the HDMI 1.3 Over
Fiber with IR receiving unit using a user supplied DB-9 serial cable.
7. Plug the included 5V DC power supplies into the HDMI 1.3 Over Fiber with
IR sending and receiving units.
8. Power on the display device fi rst and the source device second. You will
now have beautiful HDMI 1.3 video at resolutions of up to 1080p60 on your
display device with up to 8 channels of advanced digital HDMI 1.3 audio
present.
9. IR commands aimed at the Receiver unit will be intercepted and transmitted
back to the Sender unit over the CAT-5 cable. The optional IR Blaster will
rebroadcast IR command signals to the source equipment, simulating the
local presence of the IR remote control. You will now be able to operate your
HDMI source as though you are physically in front of it, while enjoying the
convenience of a far away viewing location.